6 Facts About Everyone Thinks Are True

How to Install an Attic Fan

There are hooter days than the rests of the days. Such conditions call for the need of attic fans. A lot of cooling to the homes is brought about by the attic fans. Usually homeowners may call for specialists to install the attic fan for them. However this may be costly as there are other easier ways to install. You can install an attic fan on your own without the help of the specialists. You can save the money that you may have used to get the services of the experts. This article looks at some of the easiest ways to install the attic fans.

You may need to inspect the vents. This involves measuring the temperature on a hot day. This is done to get to know how well ventilated the house. You need to decide on one type of fan that you may want to have. There are two different types of attic fans. The roof fans and the gable fans are the types of attic fans.

The measurements are needed to make the installation. You should be aware of the size of the fan that you want to install. You need to measure to allow you do the calculations. The ratings of the fan come in cubic feet of the air moved per minute. You also need to square the feet that you get to know the fan that you need. 0.7 is used to multiply the answer that is received after squaring. Whatever you get is the CFM if the fan that you may need.

Removing the older shutter is also necessary. In any case that the vent that you have is smaller than the fan you need to remove it. You will have to hold the fan over the whole of the older vent. You have to measure before cutting the event. The vents should be accommodating enough. The cuttings should enable the fan to fit very well in the hole. You should try and minimize the occurrence of vent framing any time you are cutting.

Lastly, you will have to mount the fan. Here there should be a piece of plywood that should be used in the mounting. The plywood should be fitted around the framing that surround the hole made. The plywood is fastened on the wall to help to make the hole be on the center of the vent hole. A jigsaw may be used to cut. Screws are there to make sure that it is safe. The fans need to be placed correctly.

In summary, it very easy to install an attic fan

Quotes: visit this website